- Smart choice of professionals
- +968 2498 1084
- fatek[at]oci.om
DATAKOM BATTERY CHARGER
17 December 2020
ComAp Engine controllers
The ComAp family of engine controllers offers innovative and universal system integration for a wide range of engine driven platforms and applications. With a proven track record of working in the most demanding environments, InteliDrive controllers deliver unparalleled command, control and communication advantages. The full range provides individually tailored solutions meeting the precise need of marine auxiliary, emergency and propulsion engines as well as land based platforms such as engine driven pumps, compressors, crushers and screeners.
- Support of machinery with multiple CAN devices (ECU, ACM, SCR etc.)
- Event driven History up to 4 000 records
- Redundant architecture: Main unit + Backup module
- Backup ID-RPU module with hardwired protections
- Plug&Play support of InteliVision display family of ComAp IV5CANBL, IV8MARINE, IV12TOEM
- Tier 4 Final control and visualization
- Configurable large PLC interpret with PLC editor and monitor
- Connection to engine via primary J1939 and backup J1587 buses
- Speed/load control via J1939/J1587 buses, Modbus, Binary and Analogue signals
- Configurable Modbus Registers, Modbus RTU and Modbus TCP support for easy integration into the ship’s control system
- Symmetrical load sharing for propulsion engines with J1939 (via CAN bus)
- Integrated load and clutch control
- Switching between primary and secondary battery
- Virtual shared inputs and outputs via CAN
- Over-speed and Emergency stop detection
- Communication capabilities including RS232, RS485, Modem, Modbus, Internet, Ethernet
- Remote monitoring via Modbus, TCP/IP, AirGate
- Cloud-based monitoring and control via WebSupervisor
- Active e-mail messaging and SMS
InteliDrive WP
The InteliDrive WP is a cost effective and small form factor engine controller with higher IP grade, which features outstanding control, monitoring and protection for both mechanical and electronic diesel/gas engines – all in one unit. The controller is suitable for pumps, compressors, and other simple engine control requirements.
View More
InteliDrive Lite
InteliDrive Lite is a comprehensive controller for single engines with extended support of electronic engines and extension modules. InteliDrive Lite controllers are equipped with a powerful graphic display showing icons, symbols and bar-graphs for intuitive operation, which sets, together with high functionality, new standards in engine controls. InteliDrive Lite provides gas engine support without ventilation.
View More
InteliDrive
InteliDrive DCU Industrial is a specialized engine controller for Industrial applications. It controls, monitors and protects the engine in single or variable speed operational modes. The controller can communicate with Engine Management System via the CAN serial line using standard J1939 or another (KWP2000) communication protocol. InteliDrive controllers are equipped with a powerful graphic display with icons, symbols and bar-graphs for intuitive operation, which together with high functionality sets new standards in engine controls.
InteliDrive DCU Marine Specialized engine controller for Marine applications Propulsion, Auxiliary, Emergency Provide control, monitoring and protection for variable type of engines Direct communication with Electronic Control Units.
View More
Industrial Automation Department
7 January 2020
DATAKOM Products
28 November 2020
Engine and Diesel Generator Control Systems Department
Today, the control system is an important part of the diesel generator and diesel engines industry, and good progress has been made in this area. Diesel Generator Control Allows the use of diesel generators in a variety of applications such as back-up operation, synchronization with other generators, and mains. It also covers the protection requirements that are essential to this area, which extend the service life of components and make good use of them.
OCI Co. is one of the leading companies in the field of diesel generator control systems and diesel and gas engines in the region and has strong sales and after-sales service in this field. The services of the company are as follows:
- Control system for diesel power plants, diesel generators and energy management
- Synchronous (parallel) generator control system
- Construction machinery control system
- Diesel engine control system for marine and land-based applications (Marin)
- CHP control system
High performance gen-set controllers
ComAp offers a significant and proven range of generator controllers that provide innovative and easy to use features.
From the simplest to the most complex application, ComAp products guarantee total integration with your engine system, providing flexible solutions capable of communicating and monitoring and using the latest technology on a wider range of leading electronic engines.
All ComAp controllers use a CAN bus connection combined with custom software to give you unrestricted access to hundreds of operational and diagnostic messages in an easily readable format, either on the controller screen or via a connected PC.
With growing demand for universal compatibility with electronic engines, ComAp has recently launched the new NT ‘New Technology’ range of generator controllers featuring increased memory and faster processor speed to enable them to manage the wider range of features on modern engines. The new models use one piece of software to cover a greater choice of electronic engines, which for end users has resulted in easier and quicker setting-up, simpler monitoring and more effective remote supervising and servicing.
Key range features:
- Engine specific solutions for CAT, Cummins, Deutz, GM, John Deere, MTU, Scania, Volvo Penta, and others
- Easily programmable either on screen or from a PC with free dedicated software
- Clear user-friendly LCD screen, displaying information in a choice of five languages
- Absolute precision of load sharing and speed control
- Remote control and monitoring via SMS messages, modem or internet
- Wide choice of extension modules
- Logical blocks for control of auxiliary equipment in the engine room
Industrial strength engine controllers
ComAp’s highly flexible, sophisticated engine controllers feature outstanding control, monitoring and protection for diesel and gas engines as well as peripheral equipment.
The extended product family offers individually tailored solutions for a wide range of engine specific applications from marine emergency generators and propulsion engines to land-based requirements including engine driven pumps, compressors and systems.
Key range features:
- Engine specific solutions for CAT, Cummins, Deutz, GM, John Deere, MTU, Scania, Volvo Penta, and others
- Central unit with clear user-friendly LCD graphic display
- Easily programmable either on screen or from a PC (All dedicated software FREE)
- Logical blocks for pump or compressor with active pressure control
- Clear user-friendly LCD screen, displaying information in a choice of five languages
Collaborate with OCI Company
OCI Co. has been the official ComAp distributor in the Persian Gulf since 2002 and has established a wide sales and service network over the years thanks to the qualified technical and commercial team. OCI has a significant share in the regional market in various industries including Genset manufacturers , electrical panel and enclosure builders and so on.
Countries Covered
The OCI’s headquarter is in Muscat Oman and covers areas of the Persian Gulf Countries: Qatar, UAE, Bahrain, Yemen, Kuwait.
Leave a Reply
PLC
14 October 2019
Engine Controllers
14 October 2019
ComAp AMF & MRS Controllers
ComAp understand that your application might require from a small gen-set being started and stopped manually all the way to gen-set starting and stopping automatically based on different conditions, integrated to a major monitoring and control system, with the flexibility to be expanded and even more...
Welcome to ComAp world of single gen-set controllers for AMF(Auto Mains Faluer) and MRS(Manual Remote Start/Stop).
If it is easy to use, then it saves time – and if it saves time, then it saves money! This is the concept behind our products and solutions.
This family of controllers comes with a new and very intuitive PC software.
The PC software has many pre-defined functions and settings to make the configuration process easier, but also provides you with the freedom to define the controller settings yourself.
The built-in PLC allows you to respond to more complex and specific needs of your installations saving you the cost of an external PLC solution.
ComAp’s PLC is so easy to use that you’ll able to come up with what you need from the very start.
All our products are designed to meet or even exceed quality and safety standards. This guarantees the reliability of our products, reduces the maintenance cost and give you the peace of mind you deserve.
InteliNano
InteliNano NT is a family of controllers for cost effective diesel or gasoline gen-set used for small applications.
Within this family, you can find controllers to satisfy both applications, automatic stand-by and prime power. These controllers will provide protection for the gen-set to avoid damages and their small size will make you save some space, which is normally very appreciated for small gen-sets.
This series includes models
- InteliNano NT Plus
- InteliNano MRS 3
View More
InteliLite
InteliLite is a product family designed for standby and prime power applications where there is no need for synchronization. The full range of models provides end users with excellent flexibility and choices, with special emphasis on communications and user experience
This series includes models
- InteliLite AMF 20
- InteliLite AMF 25
- InteliLite NT AMF 20
- InteliLite NT AMF 25
- InteliLite 9
- InteliLite MRS 11
- InteliLite MRS 16
- InteliLite NT MRS 15
- InteliLite NT MRS 16
- InteliLite NT MRS 19
View More